CodeLock CL5000 electronic Spécifications télécharger pdf (Page 20)

1 Cabinet lock

2 Upper fixing bolt x 2

3 Packer pieces x 2

4 Locking nut

5 Cams x 2

6 Cam fixing bolt

 • Batteries–2x1.5VAAA

 • Templatex1

1

2

3456

Cabinet Lock CL1000

Technical Specifications

Power 2 x 1.5v AAA cells

Operations 15,000 openings

Low battery The lock will signal low battery

to the user via the red LED

ashing. The lock will open

100 more times after this signal

is initiated. The non-volatile

memory retains settings when

batteries are changed.

Battery failure override

The Cabinet Locks have been designed so a

PP3 battery can be placed against the external

contacts and using Master Code to gain entry.

External dimensions

Length 136mm (5

3

/8”) x width 32mm

(1

1

/4”) x depth 30mm (1

3

/16”) to top of handle.

Colour options

Material Zinc Alloy

Buttons Dual epoxy coated buttons

Cam xing point 8mm (

5

/16”) square

Door thickness CL1004 - 6mm (

1

/4”) or less

CL1005 - 12mm (

1

/2”) or less

CL1006 - 19mm (

3

/4”) or less

CL1007 - 25mm (1”) or less

Finish Silver Grey

IP rating IP54 (when tted with

optional gasket)

For internal use

CODES

Programming Information

The Cabinet Lock has four code levels available:

i) Master Code

ii) Sub-Master Code

iii) User Code

iv) Technician Code

The Cabinet Lock is supplied with two factory

set codes:

Master Code: 11 33 55 77

User Code: 22 44

• When tted immediately change the Master

Code and User Code.

• All Master Codes and Sub-Master Codes are 8

digits long – 100,000,000 code permutations.

• All User Codes are 4 digits long – 10,000

possible code permutations.

• The lock ‘open’ time is set at 4 seconds.

FUNCTIONS

Before programming select the most appropriate

function for the application.

A) Repeat code mode

Important Note: This is the default function and

is already pre-programmed in new locks. This is

the most common function and is used where the

same code will be repeatedly used.

B) Single use code mode (locker mode)

The User enters a single use code which will lock

and then open the lock once only and then be

erased. This function is used for short term, multi

occupancy applications e.g. a locker in leisure

centre. The lock will now remain open until the

next single use code is entered into the lock.

OPERATING INSTRUCTIONS

Note: The Cabinet Lock has a 10 button keypad

and a #. The # is used when programming and is

found behind the handle.

The lock has the following code levels:

Master Code can:

Open the lock

Change the Master Code

Set / Change / Delete the Sub-Master and User

Code

Select between repeated use and single use codes

Restrict the lock time

Sub-Master Code can:

Open the lock

Change the Sub-Master

Set / Change / Delete the User Code

User Code can:

Open the lock

Change the User Code

A same code cannot be programmed into more

than one level

Technician Code can:

Open the lock without erasing User Code

CL1000

Colour Options Available

Contact Codelocks

Standard

34

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Commentaires sur ces manuels

Pas de commentaire